Induction of oxidative stress by benzo(a)pyrene in the epididymis of Wistar rats

The present study was undertaken to evaluate the effect of sub-chronic exposure to benzo(a)pyrene on the antioxidant system and histology of rat epididymal sperm. Intraperitoneal administration of benzo(a)pyrene to male Wistar rats at doses between 1 and 100 µg/kg body weight for 60 days entailed a decrease in the weight of the epididymis (caput and cauda), seminal vesicle, and prostate, while the body weight was not affected. Epididymal sperm reserves were reduced in a dose-dependent manner. Indicators of lipid peroxidation were increased while activities of superoxide dismutase and catalase in all three epididymal regions decreased. Histological malformations were observed in the epididymis. Exposure to benzo(a)pyrene deranges the antioxidant defense system and induces histological changes in the epididymis.     

Enhancement by anthraquinone-2-sulphonate of the photonitration of phenol by nitrite: implication for the photoproduction of nitrogen dioxide by coloured dissolved organic matter in surface waters

Anthraquinone-2-sulphonate (AQ2S) under UVA irradiation is able to oxidise nitrite to (·)NO(2) and to induce the nitration of phenol. The process involves the very fast reactions of the excited triplet state (3)AQ2S(*) and its 520-nm absorbing exciplex with water, at different time scales (ns and μs, respectively). Quinones are ubiquitous components of coloured dissolved organic matter (CDOM) in surface waters and AQ2S was adopted here as a proxy of CDOM. Using a recently developed model of surface-water photochemistry, we found that the oxidation of nitrite to (·)NO(2) by (3)CDOM(*) could be an important (·)NO(2) source in water bodies with high [NO(2)(-)] to [NO(3)(-)] ratio, for elevated values of column depth and NPOC.     

Total Volatile Organic Compounds in the Urban Environment of Delhi

ABSTRACT

Total volatile organic compounds (TVOCs) in the urban ambient environment of Delhi were monitored from November 1994 to June 1995 at 13 sites using an inexpensive and a manual-labor-intensive sample collection procedure in want of sophisticated equipment. The results of the study show appreciable levels of TVOCs in the ambient environment of Delhi. The amount of TVOCs in the ambient environment was found to vary between 3 and 42 ppmv and exhibited wide temporal and seasonal variations. On a diurnal cycle, TVOC levels mostly peaked at 9:00 a.m., which coincided with the peak traffic hour. TVOC buildup in the urban atmosphere has serious implications for air quality through the formation of highly toxic oxidants. The results of this preliminary study make out a strong case for a regular monitoring of TVOCs in the urban environment of Delhi.     

Landslide hazard,vulnerability, and risk assessment (HVRA), Mussoorie township,lesser himalaya,India

Environment, Development and Sustainability - In the present study, landslide hazard, vulnerability and the risk assessment of the Himalayan township Mussoorie, located in the lower part of the...     

Coal fly ash utilization: low temperature sintering of wall tiles

We present here a study of the sintering of fly ash and its mixture with low alkali pyrophyllite in the presence of sodium hexa meta phosphate (SHMP), a complex activator of sintering, for the purpose of wall tile manufacturing. The sintering of fly ash with SHMP in the temperature range 925-1050 degrees C produces tiles with low impact strength; however, the incremental addition of low alkali pyrophyllite improves impact strength. The impact strength of composites with 40% (w/w) pyrophyllite in the fly ash-pyrophyllite mix satisfies the acceptable limit (19.6J/m) set by the Indian Standards Institute for wall tiles. Increasing the pyrophyllite content results in an increase in the apparent density of tiles, while shrinkage and water absorption decrease. The strength of fly ash tiles is attributed to the formation of a silicophosphate phase; in pyrophyllite rich tiles, it is attributed to the formation of a tridymite-structured T-AlPO(4) phase. Scanning electron micrographs show that the reinforcing rod shaped T-AlPO(4) crystals become more prominent as the pyrophyllite content increases in the sintered tiles.     

Structure and Properties of Chicken Feather Barbs as Natural Protein Fibers

The structure and properties of chicken feather barbs makes them unique fibers preferable for several applications. The presence of hollow honeycomb structures, their low density, high flexibility and possible structural interaction with other fibers when made into products such as textiles provides them unique properties unlike any other natural or synthetic fibers. No literature is available on the physical structure and tensile properties of chicken feather barbs. In this study, we report the physical and morphological structure and the properties of chicken feather barbs for potential use as natural protein fibers. The morphological structure of chicken feather barbs is similar to that of the rachis but the physical structure of the protein crystals in chicken feather barbs is different than that reported for feather rachis keratin. The tensile properties of barbs in terms of their strength and modulus are similar but the elongation is lower than that of wool. Using the cheap and abundant feathers as protein fibers will conserve the energy, benefit the environment and also make the fiber industry more sustainable     

Kinetics and dynamic modelling of batch anaerobic digestion of municipal solid waste in a stirred reactor

A series of batch, slurry anaerobic digestion experiments were performed where the soluble and insoluble fractions, and unwashed MSW were separately digested in a 200l stirred stainless steel vessel at a pH of 7.2 and a temperature of 38 degrees C. It was found that 7% of the total MSW COD was readily soluble, of which 80% was converted to biogas; 50% of the insoluble fraction was solubilised, of this only 80% was converted to biogas. The rate of digesting the insoluble fraction was about four times slower than the rate of digesting the soluble fraction; 48% of the total COD was converted to biogas and 40% of the total nitrogen was converted to ammonia. Soluble and insoluble fractions were broken down simultaneously. The minimum time to convert 95% of the degradable fraction to biogas was 20 days. The lag phase for the degradation of insoluble fraction of MSW can be overcome by acclimatising the culture with the soluble fraction. The rate of digestion and the methane yield was not affected by particle size (within the range of 2-50mm). A dynamic model was developed to describe batch digestion of MSW. The parameters of the model were estimated using data from the separate digestion of soluble and insoluble fractions and validated against data from the digestion of unwashed MSW. Trends in the specific aceticlastic and formate-utilising methanogenic activity were used to estimate initial methanogenic biomass concentration and bacterial death rate coefficient. The kinetics of hydrolysis of insoluble fraction could be adequately described by a Contois equation and the kinetics of acidogenesis, and aceticlastic and hydrogen utilising methanogenesis by Monod equations.     

Metal transport phases in rivers around Jameshedpur†

Transport phases of four metals of geochemical and water quality importance were investigated in rivers around Jamshedpur. The metals iron, manganese, zinc and copper were partitioned into dissolved, adsorbed and or ion exchangeable, solid organic, oxide coating and crystalline phases applying filtration for the dissolved phase and a chemical fractionation scheme for the particulates. Iron and copper were transported mainly in the particulate phases at all sites, while manganese and zinc were found in the dissolved phase up to a hundred percent depending on the pH of water sample and pollution at the site concerned. Except copper more than 75 percent of all other three metals occurred in transport modes thought to be available to aqueous and biotic interactions. Copper was in available phases from 50 to 70 percent. The significance of metal partitioning as a factor in controlling metal availability and toxicity to biota is discussed.     

Assessment of human health risks from heavy metals in outdoor dust samples in a coal mining area

Jharia (India) a coal mining town has been affected by the consequences of mining and associated activities. Samples of outdoor fallen dust were collected at different locations of Jharia covering four different zones: commercial, petrol pump, high traffic, and residential areas. The dust samples were analysed for different trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, and Zn). The highest concentration of the elements in the dust samples are Mn (658 mg/kg), Zn (163.6 mg/kg), Cr (75.4 mg/kg), Pb (67.8 mg/kg), Ni (66 mg/kg), Cu (56.8 mg/kg), Co (16.9 mg/kg), As (4.1 mg/kg), and Cd (0.78 mg/kg). The concentration of selenium was below detection limit. Except Cd, contents of all the other elements in the dust samples were significantly lower in the residential area. High amount of Ni (145 mg/kg) and Pb (102 mg/kg) was observed in the high traffic and petrol pump areas, respectively. The exposure risk assessment strategies are helpful in predicting the potential health risk of the trace elements in the street dust. Selected receptors for risk assessment were infants, toddlers, children, teens, and adults. The calculated hazard quotient (HQ) for lifetime exposure was <1.0 for all the elements studied, indicating no risks from these elements for adults Among the receptors, toddlers were found to be more vulnerable, with HQ for Co, Cr, and Pb > 0.1. The finding predicts potential health risk to toddlers and children.     

Investigation of the Structure and Properties of Silk Fibers Produced by Actias lunas

This paper reports the structure and properties of silk fibers produced by Actias lunas in comparison to Bombyx mori and the common wild silks. Considerable efforts are being made to find new sources for natural silk and also to develop regenerated protein fibers to supplement the limited amounts of B. mori and wild silks available in the market. In addition, it has been found that non-traditional silks have unique properties and utilizing uncommon wild silks can provide income and employment to indigenous people where the wild silks are found. Actias lunas belongs to the Saturniidae family of silk producing insects. However, the structure and properties of silk produced by A. lunas have not been studied. This research showed that the silk fibers produced by the luna moth had morphological and physical structure similar to that of the common wild silks but tensile properties similar to that of B. mori silk. A. lunas silk fibers are composed of higher amounts of hydrophobic amino acids and had much less glycine than B. mori and common wild silks. With a fineness of 2 denier, breaking tenacity of 4.3?g/den and breaking elongation of 10.9?%, the tensile properties of A. lunas silk fibers were similar to that of B. mori and much better than that of the common wild silks that are coarser and have lower breaking tenacity. A. lunas fibers show good potential to be useful for applications currently using B. mori silk.